Top > PC Audio, Network Audio related products > LAN Terminator[RLT-1]


LAN Terminator RLT-1

LAN Terminator RLT-1

LAN Terminator RLT-1

Dimensions W12mm x H12mm(14.5mm incl. LAN lever H) x D71mm(incl. LAN connector)


  • 2013 MJ Technology of the year2013 MJ Technology of the year
  • 2013 Visual Grand Prix2013 Visual Grand Prix
  • 2013 Audio Accessory Excellence Award Grand Prix(PC/Net audio category)2013 Audio Accessory Excellence Award Grand Prix(PC/Net audio category)
  • 2012 SUMMER Visual Grand Prix2012 SUMMER Visual Grand Prix

Achieve dramatic improvements in sound quality by noise control and the suppression of vibrations caused by network equipment.

The LAN terminator RLT-1 is based on the X-terminator which has been developed by Mr. Takashi Kanai(The Sound subjectivity engineer of SONY) and was completed by adding our vibration suppression technology. The RLT-1 improves sound quality by noise control and the suppression of vibrations caused by network equipment.

Vacant LAN ports are the source of noise pollution

In addition to the significant noise being introduced by network equipment and their power supplies, large amounts aof additional noise is introduced via the vacant LAN ports which dramatically increases the problem.

By using the RLT-1 with a vacant LAN port, its operation is stopped. Therefore, all unwanted noise pollution and the amplification of this noise is also eliminated. This results in an improvement in sound quality by reducing distortion and increasing the signal to noise ratio.

Improvement in sound quality via vibration control.

As network equipment housings are less robust than most audio equipment, they are affected even more by vibrations from loudspeakers, resulting in serious damage of sound quality.
RLT-1 is made from of a solid and hard case of 2017S aircraft grade aluminum alloy (duralumin) and has built-in natural quartz resonators at two places in the body to enable very effective vibration control.

By using the RLT-1 with network equipment, its un-sturdy housing is reinforced and it results in the improvement of sound quality by eliminating the blurred sound image and improving energy and density, etc.

Great effect also for DENON-LINK, Accuphase HS-LINK, Blue-ray disc player !

The RLT-1 works effectively for all kinds of equipment that have LAN ports.

When there is a vacant LAN port on a DENON-LINK of Denon or HS-LINK of Accuphase, etc which is transmitting, using, the RLT-1 will make a dramatic improvements in sound and will also prevent noise pollution by reinforcement of the terminal plate.

The sound improvement of download sound source as well!

RThe RLT-1 is also effective for downloads sound sources.
One of the merits of network audio is that we can try listening to the download sound source however, the noise on the network is significantly degrading the quality of the sound source.
It is today very common in music production that sound quality is clearly degraded by the noise on a network path.

When comparing a downloaded sound source cleaned by RLT-1 and the same without any anti-noise measures, the difference is so obvious that it almost seems that we are listening to a different performer or a different passage of music.
When listening to music via P/C or network audio sources, anti noise measures are indispensable. We can say that PC/Network audio sources without ‘anti-noise’ measures are not really producing true information.


〜Experiment contents〜
Comparative experiments when downloaded with a conventional cable and ACOUSTIC REVIVE products.

1.Downloaded with a direct connection from modem to P/C by a conventional cable.
2.Downloaded through modem→(IN) rlt-1 + LAN-1.0PA+RLT-1(OUT)→P/C with  RLT-1 in a vacant LAN port.